Research & Formula Accuracy Reference: 1RM Prediction Equations

Published by FitnessToolBrand: The Evidence-Based Strength & Barbell Training Calculator Suite · Updated · Data licensed CC BY 4.0

How much do 1RM formulas disagree?

The five common 1RM equations agree most closely at 8 reps, where their estimates sit within 2.8% of each other. The gap grows to 11.7% at 12 reps and 21.7% at 15 reps. Estimate your max from sets of about 3–8 reps for the most consistent result.

What this table measures, and what it does not

Each cell is the estimated 1RM divided by the weight lifted, computed exactly from the published equation. A value of 1.167 at 5 reps means 225 lb × 5 predicts 1.167 × 225 ≈ 263 lb. Spread is the gap between the highest and lowest of the five estimates, as a percentage of their average.

This is inter-formula agreement, not measured error. It shows how much the choice of equation alone changes your number. Measured accuracy against tested maxes comes from validation studies such as LeSuer et al. (1997), summarized below.

Formula agreement table, 1–15 reps

Estimated 1RM as a multiple of weight lifted (higher = more optimistic)
RepsEpleyBrzyckiLanderLombardiMayhewAverageSpreadEpley vs Brzycki
11.0001.0001.0001.0001.0001.0000.0%+0.0%
21.0671.0291.0421.0721.1141.0658.1%+3.7%
31.1001.0591.0721.1161.1401.0977.4%+3.9%
41.1331.0911.1041.1491.1651.1286.6%+3.9%
51.1671.1251.1371.1751.1901.1595.6%+3.7%
61.2001.1611.1731.1961.2151.1894.5%+3.3%
81.2671.2411.2511.2311.2631.2512.8%+2.0%
101.3331.3331.3411.2591.3091.3156.2%+0.0%
121.4001.4401.4441.2821.3541.38411.7%-2.8%
151.5001.6361.6331.3111.4171.50021.7%-8.3%

Copy as CSV

# 1RM formula agreement: estimated 1RM as a multiple of the weight lifted
# Source: FitnessToolBrand, https://fitnesstoolbrand.com/research/1rm-formula-accuracy
reps,epley,brzycki,lander,lombardi,mayhew,average,spread_pct,epley_vs_brzycki_pct
1,1.0000,1.0000,1.0000,1.0000,1.0000,1.0000,0.00,0.00
2,1.0667,1.0286,1.0421,1.0718,1.1144,1.0647,8.06,3.70
3,1.1000,1.0588,1.0720,1.1161,1.1399,1.0974,7.39,3.89
4,1.1333,1.0909,1.1036,1.1487,1.1652,1.1283,6.58,3.89
5,1.1667,1.1250,1.1371,1.1746,1.1901,1.1587,5.62,3.70
6,1.2000,1.1613,1.1727,1.1962,1.2147,1.1890,4.49,3.33
8,1.2667,1.2414,1.2511,1.2311,1.2629,1.2506,2.84,2.04
10,1.3333,1.3333,1.3407,1.2589,1.3093,1.3151,6.22,0.00
12,1.4000,1.4400,1.4441,1.2821,1.3540,1.3840,11.71,-2.78
15,1.5000,1.6364,1.6331,1.3110,1.4172,1.4995,21.70,-8.33

Copy as Markdown

| Reps | Epley | Brzycki | Lander | Lombardi | Mayhew | Average | Spread | Epley vs Brzycki |
| --- | --- | --- | --- | --- | --- | --- | --- | --- |
| 1 | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 | 1.000 | 0.0% | +0.0% |
| 2 | 1.067 | 1.029 | 1.042 | 1.072 | 1.114 | 1.065 | 8.1% | +3.7% |
| 3 | 1.100 | 1.059 | 1.072 | 1.116 | 1.140 | 1.097 | 7.4% | +3.9% |
| 4 | 1.133 | 1.091 | 1.104 | 1.149 | 1.165 | 1.128 | 6.6% | +3.9% |
| 5 | 1.167 | 1.125 | 1.137 | 1.175 | 1.190 | 1.159 | 5.6% | +3.7% |
| 6 | 1.200 | 1.161 | 1.173 | 1.196 | 1.215 | 1.189 | 4.5% | +3.3% |
| 8 | 1.267 | 1.241 | 1.251 | 1.231 | 1.263 | 1.251 | 2.8% | +2.0% |
| 10 | 1.333 | 1.333 | 1.341 | 1.259 | 1.309 | 1.315 | 6.2% | +0.0% |
| 12 | 1.400 | 1.440 | 1.444 | 1.282 | 1.354 | 1.384 | 11.7% | -2.8% |
| 15 | 1.500 | 1.636 | 1.633 | 1.311 | 1.417 | 1.500 | 21.7% | -8.3% |

Source: FitnessToolBrand 1RM Formula Accuracy Reference, https://fitnesstoolbrand.com/research/1rm-formula-accuracy

Free to reuse under CC BY 4.0. Please credit “FitnessToolBrand” and link to this page.

Patterns in the data

  • Low reps (2–4): Mayhew is the most optimistic equation and Brzycki the most conservative, so the spread is larger than many lifters expect (6–8%).
  • Mid reps (6–8): the five equations converge; this is the most formula-independent range.
  • 10 reps: Epley and Brzycki give identical results (both 1.333×), while Lombardi drops well below the rest.
  • 12–15 reps: Brzycki and Lander climb steeply while Lombardi flattens, so the spread exceeds 10% and estimates become unreliable.

What validation research found

Compared seven prediction equations, including Epley, Brzycki, Lander, Lombardi and Mayhew, against tested 1RMs in untrained college students. Predicted and actual values were highly correlated, but absolute accuracy differed by lift, and the equations tended to underestimate the deadlift 1RM.

LeSuer, D. A., McCormick, J. H., Mayhew, J. L., Wasserstein, R. L., & Arnold, M. D. (1997). The accuracy of prediction equations for estimating 1-RM performance in the bench press, squat, and deadlift. Journal of Strength and Conditioning Research, 11(4), 211–213.

The equations and their sources

w = weight lifted, r = repetitions completed
FormulaEquationPublished source
Epley1RM = w × (1 + r / 30)Epley, B. (1985). Poundage Chart. Boyd Epley Workout. Lincoln, NE.
Brzycki1RM = w × 36 / (37 − r)Brzycki, M. (1993). Strength testing—predicting a one-rep max from reps-to-fatigue. Journal of Physical Education, Recreation & Dance, 64(1), 88–90. DOI: 10.1080/07303084.1993.10606684
Lander1RM = 100 × w / (101.3 − 2.67123 × r)Lander, J. (1985). Maximums based on reps. National Strength and Conditioning Association Journal, 6(6), 60–61. NSCA Journal abstract
Lombardi1RM = w × r^0.10Lombardi, V. P. (1989). Beginning Weight Training. Dubuque, IA: Wm. C. Brown.
Mayhew1RM = 100 × w / (52.2 + 41.9 × e^(−0.055 × r))Mayhew, J. L., Ball, T. E., Arnold, M. D., & Bowen, J. C. (1992). Relative muscular endurance performance as a predictor of bench press strength in college men and women. Journal of Applied Sport Science Research, 6(4), 200–206.

Formula accuracy FAQ

Is the Epley or Brzycki formula more accurate?

Neither is universally more accurate. Mathematically, Epley reads +3.7% versus Brzycki at 5 reps, the two are identical at 10 reps, and Brzycki reads higher above 10 reps (Epley is -8.3% at 15). Validation research (LeSuer et al., 1997) found accuracy differed by lift, so averaging equations is a reasonable default.

At what rep count do 1RM formulas agree most?

Across the five equations, the spread between the highest and lowest estimate is smallest at 8 reps (2.8% of the average). It rises to 11.7% at 12 reps and 21.7% at 15 reps, so sets of about 3–8 reps give the most consistent estimates.

Why do 1RM formulas underestimate the deadlift?

In LeSuer et al. (1997), all tested equations underestimated measured deadlift 1RM in college students. A likely reason is that most equations were built from bench press or general data, and lifters often complete fewer reps at a given percentage of max on the deadlift.

Put the data to work

Cite This Tool

Referencing this page in an article, thesis or coaching resource? Copy a ready-made citation.

APA 7

FitnessToolBrand. (2026). 1RM Formula Accuracy Reference: Epley, Brzycki, Lander, Lombardi and Mayhew [Web application]. Retrieved November 6, 2026, from https://fitnesstoolbrand.com/research/1rm-formula-accuracy

MLA 9

"1RM Formula Accuracy Reference: Epley, Brzycki, Lander, Lombardi and Mayhew." FitnessToolBrand, 6 Nov. 2026, fitnesstoolbrand.com/research/1rm-formula-accuracy.

BibTeX

@misc{fitnesstoolbrand_1rm_accuracy,
  author       = {{FitnessToolBrand}},
  title        = {{1RM Formula Accuracy Reference: Epley, Brzycki, Lander, Lombardi and Mayhew}},
  year         = {2026},
  howpublished = {\url{https://fitnesstoolbrand.com/research/1rm-formula-accuracy}},
  note         = {Accessed: 2026-11-06}
}